|DESCRIPTION||Tapecoat H35 and H50 are UV resistant, cold applied coatings designed to provide protection against corrosion and electrolysis on metal substrates. These coatings are appropriate for use above or below grade and in various soil conditions.
Tapecoat H35 and H50 have an integrated primer; the primer is in the adhesive. This exclusive formulation allows for faster application as there is no need to apply a separate primer when application temperatures are above 40°F. The Tapecoat H35 and H50 coating system is VOC free when applied without a primer. When used with Tapecoat Omniprime® the coating system will meet even the strictest environmental laws
|RECOMMENDED USE||Appropriate for coating and reconditioning small to moderate diameter pipe, bends, tees and metal structures, as a single component coating above or below grade|
|SUBSTRATE COMPATIBILITY||Steel, Stainless Steel, Ductile Iron, Other Metals, FBE, PE, PP|
|SURFACE PREPARATION||SSPC SP-2 Hand Tool Cleaning, SSPC SP-3 Power Tool Cleaning or SSPC SP-6/ NACE No. 3 Commercial Blast Cleaning|
|OPTIONAL PRIMER||Tapecoat H35 and H50 have an integrated primer to allow for quick, easy and permanent adhesion. When required by the job specification or when application temperatures are below 40°F, a 4 mil WFT of Tapecoat Omniprime may be applied to the pipe surface to ensure the required bond|
|REFERENCE||Tapecoat H35 and H50 meet all of the performance criteria listed in the most recent revisions of:
NACE SP0109 (Cold-Applied Laminate Polymeric Tapes) ANSI/AWWA C209 (Type II)